The sulfur recovery unit of Maoming Petrochemical Company was put into operation successfully

Release time:

2020-09-21 10:09

Source:

美篇

Maoming Petrochemical's environmental protection capabilities have been further upgraded.
       At 10:58 on September 4, 2020, the No. 7 sulfur recovery unit introduced raw material gas into the unit, and successfully produced qualified liquid sulfur products at 15:58, marking the successful start-up of the unit.
       The device started construction in January 2019, with a design processing capacity of 150,000 tons per year. It is an environmental protection device supporting the Maoming Petrochemical Product Structure Optimization Project, and is currently the company's largest sulfur recovery device.
       For the first time, the device adopts the sulfur dioxide recovery method of Shell Consolv technology in the sulfur recovery unit of Sinopec. Features such as low emission concentration. After the plant is put into operation, Maoming Petrochemical's sulfur recovery capacity will reach 490,000 tons per year, which can well meet the needs of environmental protection.
       Since entering the start-up stage on June 2, the device has been under construction while starting. The participating units of the company are meticulously deployed, scientifically coordinated, focused on me, and overcome difficulties. In accordance with the requirements of "wherever the construction is, the trial production preparation is there, and the trial production is used to lead the overall planning of the construction", and the organization, personnel, and technology are fully prepared , materials, marketing, external conditions and other preparations, and accelerate the construction and commissioning of the device.
        Participating units such as the oil refining division and the instrument control and measurement department intervened in advance to carry out in-depth "three investigations and four determinations", eliminating hidden dangers affecting the start-up and normal operation of the equipment, and strengthening the construction quality of the equipment. At the same time, through measures such as "time-staggered, misplaced, and hard isolation" to reduce the safety and environmental risks of on-site construction and ensure that the construction starts without delay.
        On September 19, 2020, the No. 3 sulfur packaging device also successfully started steaming safely!

 

Related News

Warm congratulations to Nanjing Sanpu Granulating Equipment Co., Ltd. on the completion of the new factory and officially settled

On October 8 , 2022 , on this happy day, the new plant of Nanjing Sanpu Pelletizing Equipment Co., Ltd., located at No. 50 Tiancheng Road, Binjiang Economic Development Zone, Jiangning District, Nanjing, was officially put into use .

Zibo Qixiang Tengda "200,000 tons/year maleic anhydride expansion project" granulation system passed acceptance and put into production and operation

The 200,000 tons / year maleic anhydride project of Zibo Qixiang Tengda Chemical Co. , Ltd. selected the complete set of granulation molding system equipment and the central control DCS control system designed and manufactured by our company, and was officially put into use at the Zibo site on April 18 , 2022 . Production runs and produces qualified maleic anhydride granules.

The granulation system of 100,000 tons/year Potash Fertilizer granulation project of Qinghai Lianyu Potash Fertilizer Co., LTD has been put into operation and passed the owner's acceptance

The complete set of granulation molding system and its DCS control system designed and manufactured by our company for the 100,000 tons / year potash granulation project of Qinghai Lianyu Potash Fertilizer Co., Ltd. have been used in Qinghai Lianyu Potash Fertilizer Co., Ltd. on November 15 , 2021 It was formally put into production and operation and produced qualified potassium fertilizer granular products.

A complete set of equipment for lumping granulation molding system of 100,000 tons/year coal-based activated carbon project has been manufactured

The complete set of granulation molding system equipment and DCS control system designed and manufactured     by Nanjing Sanpu for the 100,000 tons / year coal-based activated carbon project of Zuoyun Quesheng Coal Chemical Co. , Ltd. have all completed the manufacturing inspection and are waiting to be sent to Zuoyun, Datong City, Shanxi Province Quesheng Coal Chemical Co., Ltd. project construction site installation. The device is expected to be officially put into production and operation in March 2022 .

16 thousand tons/year coal based activated carbon granulation molding equipment has completed the manufacturing and delivery tasks

The 16,000 tons / year coal-based activated carbon granulation equipment has completed the manufacturing and delivery tasks The 16,000 tons / year coal-based activated carbon granulation equipment and its DCS control system     developed, designed and manufactured by our company have been manufactured and sent to the installation site of Xinjiang Shanshan Carbon Manufacturing Co., Ltd. of Hoshine Silicon Industry Co., Ltd. The project is expected to be officially put into production and operation in January 2022 .

online message

We will contact you within one working day. Please pay attention to your email.

Submission