Singapore Nanyang Chemical SPCI Co., LTD. Rotary sulfur granulator drive successfully

Release time:

2013-03-11 09:23

Source:

The RDG-15 rotary drum sulfur granulator developed by Nanjing Sanpu Pelletizing Equipment Co., Ltd. was successfully started up in July 2011 at the 100,000-ton/year sulfur plant of Singapore Nanyang Chemical SPCI Co., Ltd., creating a breakthrough in developed countries. It is the first time to use a sulfur granulator with a production capacity of 15 tons per hour under very strict environmental protection requirements. Make my country's sulfur molding technology reach the international advanced level. It has laid a solid foundation for promoting the granulator internationally in the future.

Since the device is built near the port of Singapore, the requirements for environmental protection and emission are very strict. In November 2010, the company conducted a detailed inspection of the rotary drum sulfur granulator and steel belt granulator produced by Nanjing Sanpu Pelletizing Equipment Co., Ltd., and visited the user site. Due to the direct discharge of liquid sulfur, sulfur waste gas and dust from the steel belt granulator, there is no dust removal system. The rotary drum sulfur granulator is equipped with a wet water film dust removal system, and obtains very environmentally friendly emission data from the user site. Based on Singapore's strict environmental regulations and port terminal land restrictions. The final decision was to purchase a rotary drum sulfur granulator, which was put into use in July 2011 and has been in use for 15 months.

Judging from the use of more than one year, the sulfur drum granulator has the following characteristics: 1. It occupies a small area, only 1/3 of the area of ​​a steel belt granulator, which reduces the cost of civil construction. 2. Easy to install and reduce installation time. The rotary drum sulfur granulator can be installed on site as a whole, and only the sulfur pipe and cooling water pipe are connected. 3. The production capacity is large. After long-term production and operation assessment, the average sulfur granulation output is 18 tons/hour. The product is spherical in 2~8mm. 4. The operation process is stable, the operation is simple, and the maintenance cost is greatly reduced. The whole device can be operated by only 3 people. There is no replacement of wearing parts in a year, which greatly saves maintenance and repair expenses.

Related News

Warm congratulations to Nanjing Sanpu Granulating Equipment Co., Ltd. on the completion of the new factory and officially settled

On October 8 , 2022 , on this happy day, the new plant of Nanjing Sanpu Pelletizing Equipment Co., Ltd., located at No. 50 Tiancheng Road, Binjiang Economic Development Zone, Jiangning District, Nanjing, was officially put into use .

Zibo Qixiang Tengda "200,000 tons/year maleic anhydride expansion project" granulation system passed acceptance and put into production and operation

The 200,000 tons / year maleic anhydride project of Zibo Qixiang Tengda Chemical Co. , Ltd. selected the complete set of granulation molding system equipment and the central control DCS control system designed and manufactured by our company, and was officially put into use at the Zibo site on April 18 , 2022 . Production runs and produces qualified maleic anhydride granules.

The granulation system of 100,000 tons/year Potash Fertilizer granulation project of Qinghai Lianyu Potash Fertilizer Co., LTD has been put into operation and passed the owner's acceptance

The complete set of granulation molding system and its DCS control system designed and manufactured by our company for the 100,000 tons / year potash granulation project of Qinghai Lianyu Potash Fertilizer Co., Ltd. have been used in Qinghai Lianyu Potash Fertilizer Co., Ltd. on November 15 , 2021 It was formally put into production and operation and produced qualified potassium fertilizer granular products.

A complete set of equipment for lumping granulation molding system of 100,000 tons/year coal-based activated carbon project has been manufactured

The complete set of granulation molding system equipment and DCS control system designed and manufactured     by Nanjing Sanpu for the 100,000 tons / year coal-based activated carbon project of Zuoyun Quesheng Coal Chemical Co. , Ltd. have all completed the manufacturing inspection and are waiting to be sent to Zuoyun, Datong City, Shanxi Province Quesheng Coal Chemical Co., Ltd. project construction site installation. The device is expected to be officially put into production and operation in March 2022 .

16 thousand tons/year coal based activated carbon granulation molding equipment has completed the manufacturing and delivery tasks

The 16,000 tons / year coal-based activated carbon granulation equipment has completed the manufacturing and delivery tasks The 16,000 tons / year coal-based activated carbon granulation equipment and its DCS control system     developed, designed and manufactured by our company have been manufactured and sent to the installation site of Xinjiang Shanshan Carbon Manufacturing Co., Ltd. of Hoshine Silicon Industry Co., Ltd. The project is expected to be officially put into production and operation in January 2022 .

online message

We will contact you within one working day. Please pay attention to your email.

Submission