Welcome to Nanjing Sunup Granulation Equipment Co., Ltd.

Products

TECHNOLOGY

News

Tel:86-25-52401353
        13505173158
ADD:Xishan Bridge, Yuhuatian District, Nanjing (traffic map)

Copyright © 2018 Nanjing Datang Electronic Technology Co., Ltd. All Rights Reserved

苏ICP备11026504号-1  Powered by 300.cn

About us

PRODUCTS

产品类型

Contact Us

Nanjing Sunup Granulation

Equipment Co., Ltd. 

Phone: +86-25-52401353

Mailbox: webmaster@sunup.com.cn

Address: Xishan Bridge, Yuhuatian District, Nanjing

Page view
Product

TRG Series Counter Gear Rolling Granulator

没有此类产品
Product description

Working principles:

The machine uses a pair of non-driving meshing gear as extrusion parts. Its working principle is positive displacement continuous extrusion. There are corresponding cylindrical through-holes in dedendum. The core of gear is hollow. Cylindrical through-holes directly connect with hollow part of the core from the dedendum. With the synchronous counter-rotating revolution, materials between two gears are uniformly filled in the tooth space while addendum of a gear forces materials inside the tooth space to the apertures at the dedendum, and extrudes the materials from inner wall of the core of the hollow gear. There is a slicer in the inner wall to cut strips of the materials, thus obtaining cylindrical particles with uniform length.

The machine is widely applied to granulation of more materials with high strength of particles and uniform length. The particles are cylindrical, and diameter of the particles ranges between 2.0 to 8.0 mm, with granulation rate of higher than or equal to 95%.

 

 

 

Scope of application:

The machine is widely applied to granulation of catalyst, auxiliaries, additives, daily chemicals, pesticides, etc

Main advantages:

• As the machine is rolled by gear, and materials are extruded through positive displacement compression. Therefore, the machine is widely applied to granulation of more materials, and granulation of thixotropic materials in particular.

• Built-in scraper contributes to particles with uniform length.

• Compared with screw extruder, the machine features lower water content in the materials required for the granulation, and higher strength of particles.

• The shortcoming of the machine is relatively low productivity of single machine.

Specification and model

 

Model
Pitch diameter(mm)
Driving power(kw)
TRG-100
100
7.5
TRG-180
180
15

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article